Sale ends soon!
Specification Resolution:1080P(1920*1080P),720P(1280*720P) Front lens view angle:170Â° Rear lens view angle:120Â° External storage support:Up to 32GB Functions:Loop recording/Motion detection/Night vision Voltage:12V Pixels:5 million MHz Power interface:5V 1.5A Easy to set up: Install it over your existing rear view mirror and install the cable inside the cabin of the vehicle. Connect the red wire from the rear camera to power positive wire of back up light. Auto operate:Connecting the device to car power. Start the enginee, the device will turn on and start recording automatically. When the car fire shut off, the device will save the video file automatically and turn off. Screen saver function:If the always bright screen makes you uncomfortable, you can set up the screen saver function, it will automatically enter the screen protection mode after inactivity. Also can short press the Power button. Press any key and the screen is bright again(even if the screen turns black, it still keeps recording). If the camera you received can’t be switched on:Please connect your camera directly to car power via car charger for a while, not via USB, USB cable is only for data transfer but not for charging.Also voltage from other charging methods is not fully compatible with the camera, perhaps cause damage to the camera if charged that way. Tips:1.When the device occur froze or the screen is garbled, use one pointed stick or needle to press the reset button. 2.The camera can only be on car which is of the 12V power.It may burn the motherboard if used in a 24V. 3.The red wire of the rear pull line connects with the positive pole of reversing light.Need to close motion detection function when driving on the road. 4.Any problems or trouble,please don’t hesitate to contact us(firstname.lastname@example.org).